I just ordered the same exhaust and looking at the YA-6814 K&N air filter. I looked at the power commander website and they didn't have a map specifically for the yoshimura exhaust. What map did you end up using?
Dustin
Dustin
I prefer the bike white, but I wanted the black Frame. So, I purchased my bike in red, just put on the white Plastics today and Yoshimura fender eliminator.
Yoshimura carbon fiber Exhaust and power commander came in yesterday. Maybe next weekend for those.
Here is my before and After, thus far
http://mule.dyndns.org/dolphineus/forums/fz07/fz07_mod1.jpg
-braingarble
i thought about plasti dip as well but wasn't sure how it would hold up with my knees rubbing all up on it and my jacket when i lean forward.I'm on the exact same boat, really wanted a white bike but I just hate that silver frame. Where did you get your plastics? I can't seem to find any online, so just through Yamaha? I might just get the red bike and plasti-dip the plastics, and possibly powdercoat the silver guards in the rear to black.
Let me know how you like your power commander and exhaust setup. I am going with the same exhaust soon and have herd that power commander is not needed but some have said it is recommended. Might go with the exhaust first and then look into the PC later down the road. Funny how we are basically considering building the exact same bike...are you getting shorty levers too? hahaI prefer the bike white, but I wanted the black Frame. So, I purchased my bike in red, just put on the white Plastics today and Yoshimura fender eliminator.
Yoshimura carbon fiber Exhaust and power commander came in yesterday. Maybe next weekend for those.
Here is my before and After, thus far
http://mule.dyndns.org/dolphineus/forums/fz07/fz07_mod1.jpg
-braingarble
Nice, thanks for the info. I would like a black bike but they don't even sell them in the US so it looks like that might be my only option.I thought about plasti dip as well but wasn't sure how it would hold up with my knees rubbing all up on it and my jacket when i lean forward.
I had the dealer order them for me. I only ordered the 3 parts needed to change the gas tank for around $150.
I would go with a red bike and just plasti dip or paint the red plastics. everything else on the bike is black except the foot peg guards if I'm not mistakinNice, thanks for the info. I would like a black bike but they don't even sell them in the US so it looks like that might be my only option.
Yea and I have a friend who does powdercoating in the area so I think I'll try to get the guards flat black as wellI would go with a red bike and just plasti dip or paint the red plastics. everything else on the bike is black except the foot peg guards if I'm not mistakin
Sorry for delayed response... I haven't installed power commander yet. I haven't had too much riding time with exhaust, but i think I believe it to be running a little lean. If I get time this weekend, I may wire it up. As for the mapping, I agree I haven't seen a mapping for the Yoshi exhaust. I think the interface for the power commander let's you install the stock mapping and tweak specific settings. I'll let you know. As for shorty levers, maybe. Let me know if you do them, I'd like to see them. Plastics cost me about $200 from dealer.Let me know how you like your power commander and exhaust setup. I am going with the same exhaust soon and have herd that power commander is not needed but some have said it is recommended. Might go with the exhaust first and then look into the PC later down the road. Funny how we are basically considering building the exact same bike...are you getting shorty levers too? haha
I haven't installed pc, yet. I'll let you know how I make out once I do.I just ordered the same exhaust and looking at the YA-6814 K&N air filter. I looked at the power commander website and they didn't have a map specifically for the yoshimura exhaust. What map did you end up using?
Dustin
How did you do the fender eliminator? I like getting that moved up like you did.I prefer the bike white, but I wanted the black Frame. So, I purchased my bike in red, just put on the white Plastics today and Yoshimura fender eliminator.
Yoshimura carbon fiber Exhaust and power commander came in yesterday. Maybe next weekend for those.
Here is my before and After, thus far
http://mule.dyndns.org/dolphineus/forums/fz07/fz07_mod1.jpg
-braingarble
I bought the yoshimura fender eliminator kit. http://www.revzilla.com/motorcycle/yoshimura-fender-eliminator-kitHow did you do the fender eliminator? I like getting that moved up like you did.
Thanks!
I bought the yoshimura fender eliminator kit. http://www.revzilla.com/motorcycle/yoshimura-fender-eliminator-kitHow did you do the fender eliminator? I like getting that moved up like you did.
Thanks!
Can you send me a link to the Plastics, I have the armor gray and would like white plastics aswellI prefer the bike white, but I wanted the black Frame. So, I purchased my bike in red, just put on the white Plastics today and Yoshimura fender eliminator.
Yoshimura carbon fiber Exhaust and power commander came in yesterday. Maybe next weekend for those.
Here is my before and After, thus far
http://mule.dyndns.org/dolphineus/forums/fz07/fz07_mod1.jpg
-braingarble