FZ 07 Owners Club banner

1 - 9 of 9 Posts

·
Registered
Joined
·
11 Posts
Discussion Starter #1
Put a set of FZ6R bars on, puts your hands an inch forward and an inch or so down. I'll let you know how it feels. Should put a little more weight on the front end.
 

·
Registered
Joined
·
74 Posts
Put a set of FZ6R bars on, puts your hands an inch forward and an inch or so down. I'll let you know how it feels. Should put a little more weight on the front end.
Lower bars do work better for front end feel.....but there is no feel on an stock FZ07. The stock tires provide no feedback at all ..and the front suspension is numb. Not to mention that the rubber mounted handlebars remove any "feel" that had any chance to reach the bars. The solution is to upgrade the fork internals and change over to a more sport oriented tire. With the AK20's and BT016 Pros....I have really good feel now. It tracks around corners like a slot car.
 

·
Registered
Joined
·
11 Posts
Discussion Starter #4
Sorry it took so long. They were easy to put on, only mod was to drill new holes for the locating pins on the switches. 017.JPG 018.JPG
 

·
Registered
Joined
·
11 Posts
Discussion Starter #6
They actually move the grips forward and down about an inch. They also give you room to rotate the brake lever down, without the resevior hitting the bar.
 

·
Registered
Joined
·
93 Posts
My main complaint with the stock bars is the angle (I wish the grips were straighter and not angled back so much), but I wouldn't mind them a little lower, narrower, and slightly more forward too.
Suggestions?
 
1 - 9 of 9 Posts
Top